SenseCAP Solar Node P1-Pro
Professional solar repeater with 5W solar panel and 13,400mAh battery. Completely self-sufficient for outdoor use.
Important: 868 MHz for Europe
Always buy the 868 MHz version for use in Europe. The 915 MHz version (US) is not allowed in Europe.
What is the SenseCAP Solar Node P1-Pro?
The SenseCAP Solar Node P1-Pro is a professional outdoor mesh node that operates completely self-sufficiently. With an integrated 5W solar panel and four 18650 batteries (13,400mAh total), this device can run for weeks without external power.
The device comes ready-to-use with pre-installed Meshtastic firmware, including all mounting hardware for wall or pole installation. With a range of 8-9 km in open areas, this is the ideal choice for expanding mesh networks.
The P1-Pro is developed by Seeed Studio, a Chinese manufacturer founded in 2008. Seeed is known for the Grove system for modular electronics and is a pioneer in the maker community. They organized the first Maker Faire in China (2012).
Technical Specifications
| Chipset | XIAO nRF52840 Plus (ARM Cortex-M4, 64 MHz) + Wio SX1262 LoRa |
| LoRa Frequency | 862-930 MHz (868 MHz for EU) |
| Display | No display (status via LED) |
| Battery | 4x 18650 cells (13,400mAh total) + 5W solar panel |
| GPS | Yes, built-in (XIAO L76K module) |
| WiFi / Bluetooth | LoRa + Bluetooth BLE 5.0 |
| Dimensions | 308 x 224 x 78 mm, ~1.3-1.5 kg |
| Special Features | 22 dBm TX power, IPX5 weather resistant, Grove expansion port, wall/pole mounting (70-100mm poles) |
Why the SenseCAP Solar P1-Pro?
The P1-Pro is the best choice for outdoor repeaters and relay nodes. Thanks to the combination of solar panel and large battery capacity, the device keeps running for weeks, even without sunlight. The 22 dBm transmit power provides range up to 8-9 km.
Installation is simple: the device comes complete with all mounting accessories for walls or poles. The IPX5 rating means protection against rain and splashing water. Via the Grove port you can connect additional sensors for environmental monitoring.
Tip: Place the node in a high, unobstructed location for optimal range. The P1-Pro is ideal for neighborhood networks, nature areas, or as reinforcement of existing mesh coverage.
Buy SenseCAP Solar P1-Pro
The SenseCAP Solar Node P1-Pro is available from the official Seeed Studio webshop. Seeed has a German warehouse for fast EU delivery.
View at Seeed StudioMake sure to select the 868 MHz version for Europe
Join the MeshCore Network
Have questions about this device? Join our Telegram community for help and advice.