Heltec MeshPocket
Unique 2-in-1: MeshCore LoRa node combined with Qi2 magnetic powerbank. E-ink display and immediately ready for use.
Important: 868 MHz for Europe
Always buy the 868 MHz version for use in Europe. The 915 MHz version (US) is not allowed in Europe.
What is the Heltec MeshPocket?
The Heltec MeshPocket is a unique device that combines a full-fledged MeshCore LoRa node with a Qi2 magnetic powerbank. It is the first device of its kind: you can send messages via the mesh network while simultaneously charging your phone.
With the 2.13" e-ink display, you can clearly see messages and status, even in direct sunlight. The MeshPocket comes with pre-installed firmware and is ready to use immediately - unbox and go.
This device is developed by Heltec Automation, a Chinese manufacturer based in Chengdu that has been making LoRa and IoT products since 2014. They have their own factory with 3 SMT lines and are known for innovative, affordable hardware.
Technical Specifications
| Chipset | Nordic nRF52840 (ARM Cortex-M4) + Semtech SX1262 LoRa |
| LoRa Frequency | 863-870 MHz (EU) - Note: buy the correct version! |
| Display | 2.13" E-Ink display, excellent readability in sunlight |
| Battery | 5000mAh or 10000mAh version (with Qi2 wireless charging output) |
| GPS | No (not built-in) |
| WiFi / Bluetooth | Bluetooth 5.0 (no WiFi) |
| Dimensions | 102 x 74.1 x 11.5 mm (5000mAh) / 17 mm (10000mAh) |
| Special Features | Qi2 wireless charging (5-15W), USB-C in/out, simultaneous charge/discharge, ABS + tempered glass |
Why the MeshPocket?
The MeshPocket is perfect for those who want convenience. It is not a DIY project but a ready-to-use product. Unbox, turn on, and you are connected to the mesh network. The 2-in-1 functionality makes it ideal for daily use.
The Qi2 magnetic charger works with all Qi-compatible phones, including iPhones with MagSafe. With the 5000mAh version you can receive mesh messages for a week, with the 10000mAh version even longer.
Note: The MeshPocket has no GPS and no WiFi - only Bluetooth for connection with your smartphone. Firmware updates require a special magnetic pogo-pin cable (USB-C is for charging only). When wireless charging simultaneously, LoRa reception may be disrupted.
Buy MeshPocket
The MeshPocket is available from the official Heltec Store. Note: Choose the 863-870 MHz version for Europe. Available in yellow and grey.
View on AliExpressMake sure to select the 868 MHz version for Europe
Join the MeshCore Network
Have questions about this device? Join our Telegram community for help and advice.